A solder is defined as a fusible metal alloy that is typically used to join together to combine metal work pieces. The solder usually has a lower melting point compared to the work piece. It usually has a melting range of approximately 90to 450 degrees Celsius or 190 to 840 degree Fahrenheit. This metal alloy is usually applied in plumbing and as well as other electronic devices. Soldering can be classified into silver soldering, hard soldering, or brazing.
Silver solder is also used in manufacturing to combine parts of metal that cannot be welded. The alloy used in this type of solder contains high proportion of silver. This is due to the fact that silver provides good mechanical strength. However, silver has worse ductility compared to lead. Without lead, silver helps in improving the resistance to fatigue from the thermal cycles. Silver also solidifies fast and is also easily separable from the board. The addition of silver to tin also aids in the reduction of the solubility of the silver coatings during the tin phase.
These days, there are already many companies that sell silver solder to manufacturers. Most silver-base solders are easier to use compared to fluxseed rods. Aside from this, silver also bonds to more metals with over 70,000 psi. This is very useful in materials that require high strength. Using silver as solder also produces no rubberized odors. This is also very effective in wetting burned stainless steel. Last but not the least, most silver-based solders are also very easy to apply, which require only little effort. In addition to these, the silver alloy can also mix and bled well with other types of metals. These include cast iron, brass, steel, stainless steel, and as well as copper. As a matter of fact, silver can also work perfectly with the combination of any of these metals. These are just a few of the important and significant things to know about silver soldering.